Rear Sight Changed

Feb/13/2014
The rear sight has been changed to this newer one.

The old sight was removed from the top brass strip and replaced with this one.  This sight is a bit fragile and this pistol will need it's own storage case for protection.

Each 1/4 turn of the thumb nut moves the sight tube up or down 0.0078125 inch.

Close up from the left side.
Base was modified to allow further downward movement (notched) to simulate the older sight tube.  The base was then soft soldered to the top strip.

 Right side view.

Top view.
The screw slot on the left is oval to allow for windage adjustments.

How it looks to the shooter.
Everything is in alignment vertically but the may not be.(Maybe it is now)

What you cannot see is that the top brass strip is adjustable for windage. There is a small "notch" that matches at the back of the frame and brass piece.

IdeZilla

Comments are welcomed.