Correvon #2

Here is another try at making a "Correvon" action functional.

As of today, Oct/12/2014.
Popped cap near hammer head.
Stock needs a lot more shaping, etc.

Internals. 8-32 US thread screw holds action to barrel plate. Barrel plate is cut from steel angle. Barrel is Stainless .50 cal, rear piece of a DISC rifle barrel sold as surplus online. About 6 inches long.  Screen door spring having 0.042 inch wire diameter. A 3/32 inch roll pin holds the back of that spring.

Action a bit closer.
Near the rear of the action is a 3/32 inch brass pin, all they way through action and stock. Trigger and hammer pins are 1/8 inch diameter steel.

Shooters view, a bit crooked. :-)
Two holes at front of barrel for front sight.
Temporary tang screw.

Screen print of "CADSTD" file.
Shows how it's made before cutting steel.
Free CAD program available at: http://cadstd.com/
This file also free, if you ask, "correvan_A4.cad",
It is an A sized drawing for printing, Ver #4.

---

11/4/2014
Reshaped the grip to give more room for my knuckles.
Blued the hammer and trigger.

---

2/11/2015
Making a whole new Cherry grip.  No pix as yet.

---

IdeZilla

Comments Welcomed.